Multiple Input Analyzer
UDA2182 Universal Dual Analyzer
One of the most versatile analytical instruments to date.
The UDA2182 monitors and controls analytical process variables such as acidity or alkalinity (pH), Oxidation Reduction Potential (ORP), contacting conductivity and Dissolved Oxygen (DO) concentration. Applications of the UDA2182 include power water quality control, wastewater influent and effluent, pure water preparation, food and dairy and neutralisation.
✓ Mix-And-Match Input Card Design
✓ Menu-Driven Configuration
✓ High Resolution Graphic Backlit Display
✓ Ethernet Communications
✓ Wireless IR Interface
✓ Multiple Language Prompts
✓ Easy to Install, Operate and Maintain
✓ Accurate Measurement
Tech Specifications
| Case | Plastic Enclosure CSA Type 4X (NEMA 4X) |
| Display | LCD Dot Matrix, 128 x 64 dpi |
| Display Accuracy | 0.05% of Reading |
| Control capabilities/advance features | PID Control, Ethernet/Modbus Communications, Pocket PC and Infrared Configuration, , High Purity Water Solution Compensation, 0.2 sec Update Rate, E. European Languages |
| Operating Conditions | 0° to 60°C (32° to 140°F) |
| Operating Voltage | 90-264 Vdc; 47-63 Hz |
| Analogue Outputs | Up to Three 4 to 20mA |
| Relays | Up to 4 Relays |
| Mountings | Pipe, Wall, or Panel |
| Approvals | CE; FM Class 1, Div. 2; UL/CSA General Purpose |
pH/ORP Sensor
pH is measured in a wide variety of process applications to ensure product quality, monitor effluent discharge and to control addition of chemicals for optimum chemical reaction.
pH Input
The pH input in UDA2182 will accept a wide variety of sensors-non-glass Durafet®, HB high performance pH series and traditional glass Meredian® electrodes, ORP combination electrodes and the HPW700 high purity system. The pH input also features:
● Auto Buffer Calibration
● High Purity Water Solution Compensation
● 0.2 sec update rate for fast responding Durafet® pH Electrodes
Tech Specification
| 7773 Mounting | 7777 Mounting | |
| Measurement Range | 0-14pH ±1600 mV ORP |
0-14pH ±1600 mV ORP |
| Temperature Range | Depends on Sensor | Depends on Sensor |
| Pressure and Temperature Ratings |
Immersion/Polypropylene 316 SS Flow-through/polypropylene |
For Durafet II pH Electrodes 51205554-001(In-line) and Meredian II pH Electrodes: 345 kPa (50 psig) @ 100°C, 690 kPa (100 psig) @ 50°C For ORP Meredian II electrodes 31074388 gold: 345 kPa (50 psig) @ 100°C, (690 kPa 100 psig) @ 50°C 31074389 platinum: 345 kPa (50 psig) @ 110°C, 690 kPa (100 psig) @ 50°C |
| Materials of Construction |
Polypropylene, Ryton or 316 SS |
Durafet and glass electrode bodies, Ryton |
| Mountings |
Immersion or flow-through |
Immersion or in-line tee (3/4 in. NPT fitting) |
|
|
|
Conductivity Sensor
Measure conductivity, resistivity, salinity and chemical concentrations with Honeywell’s conductivity cells and mountings.
Conductivity Input
The conductivity input in UDA2182 indicators accepts signals from Honeywell’s standard selection of contacting conductivity cells. It features:
● Temperature Compensation Curves
● Calculation of % Rejection/Passage and difference of two cells
● Conversions to ppm, ppb or ppt Total Dissolved Solids (TDS)
● CO2, Concentration Algorithm
● pH from Differential Conductivity
| Sensors | 4973 Contacting Conductivity Cells | 4905 Contacting Conductivity Cells | 4909 Contacting Conductivity Cells | 5000TC Toroidal Conductivity Cells |
| Measurement Range | 0.01, 0.1, 1.0, 10 cell constants, 0.055μS/cm to 250 mS/cm | 0.01, 0.1, 1.0, 50 cell constants, 0.055μS/cm to 1S/cm | 0.01, 0.1, 10.0, 50 cell constants, 0.055μS/cm to 1S/cm | 0.2 to 200 milliSiemens/cm |
| Pressure and Temperature | 1724 kPa @ 140˚C (250 psig @ 284˚F) | 1034 kPa @ 130˚C (150 psig @ 266˚F) | SS: 3.45 bar @ 140˚C (250psig @ 284˚f), CPVC 2.07 bar @ 140˚C (30psig @ 284˚F | Polypropylene: 6.9 bar @ 100˚CC (100psig @ 212˚F), PVDF: 6.9bar @ 120˚C (100psig @ 248˚F), PEEK: 13.8 bar @ 150˚C (200psi @ 302˚F), PFA Teflon: 13.8 bar @ 150˚C (200psig @ 302˚F) |
| Material of Construction | Titanium or graphite | Nickel or platinum | Nickel or platinum | Polypropylene, PVDF, PEEK, PFA Teflon |
| Mountings | ¾ inch NPT threaded fitting | 1-inch NPT threaded fitting | Insertion/removal ball valve assembly in CPVC or SS allows insertion or removal of cell without stopping the process | Immersion union adapter, sanitary 2-inch flange or insertion/removal |
|
|
|
|||
Dissolve Oxygen
Determine the levels of dissolved oxygen in water with a reliable and universal analytical indicator.
Companies use the universal UDA2182 indicator for its versatility in measuring conductivity, pH, ORP and dissolved oxygen. With its ‘mix-and-match’ input design, it offers unrivalled flexibility for a wide range of applications. Its common form, fit and function to older Honeywell analysers also enables a quick and easy retrofit into existing panels and installations.
Dissolved Oxygen Input
The dissolved oxygen input is from Honeywell’s unique equilibrium probe. It has these additional features:
● ppm or ppb Measurement
● Automatic or Manual Calibration
● Ambient Temperature and Atmospheric Pressure Compensation
Greater value and enhanced performance
These analysers or probe systems determine the levels of dissolved oxygen in water. The patented equilibrium dissolved oxygen probe design is unaffected by inert fouling or changes in flow conditions. The system’s analyser/controller measures either ppb DO levels in power plant and semiconductor applications for corrosion detection or deaerator efficiency or ppm DO levels in wastewater, environmental and process applications for control and compliance.
DL5000 Equilibrium Probe for PPB & PPM Application
| Measurement Range | 0-20,000 ppb or 0-20 ppm |
| Temperature Range | 2˚ to 60˚C (35.6˚ to 140˚F) |
| Pressure and Temperature Ratings |
316SS: 50 psi (345 kPa) CPVC: 30 psi (207 kPa) |
| Materials of Construction | 316SS or CPVC housing |
| Special Features | Equilibrium probe design requires no internal probe maintenance |
| Mountings | Immersion in tank, in-line or sample flow chamber |
| Dimension (OD) | 219 x 34 mm (8.62 x 1.32 in), 1-inch NPT pipe size, 20-feet waterproof cable |
| Response Time | 85% in 60 seconds |
Gas Analyzer
Accurate Analysis of Binary Gases
The Honeywell 7866 Thermal Conductivity Analyzer is designed to provide a highly sensitive and accurate analysis of a binary (2- component) mixture of gases. It can be calibrated to measure a single component of a multicomponent gas mixture, providing the background gasses constitute a stable mixture (such as air), or have approximately the same thermal conductivity.
Thermal Conductivity
The 7866 Analyzer features a thermal conductivity system that measures concentrations of hydrogen purity and CO2 gas. This measurement is typically made in hydrogen-cooled generators.
- Easy to use prompts
- Security code-protected
- Reliable solid state design
- High response speed
- High sensitivity
- Excellent stability
- Low maintenance requirement
- Low installation costs through optional remote mounting capability of the sensing unit (transmitter)
- Explosion-proof housing on the sensing unit available for Class1, Div1 areas
- Signal transmission from the sensing unit up to 1000 feet over unshielded lead wires
- Panel-mounted 1/4 DIN control unit with easy-to-read display
- Current output signal from the control unit representing measured PV
- Single or dual alarms
- A triple range analyzer for hydrogen cooled generator applications
- Optional Modbus communications supports configuration and data acquisition
| H2 Purity Gas Analyzer | 7866 Analyzer |
| Accuracy | ±2% of span |
| Response Time (for H2) | Initial, <1 sec 63%, 13 sec, 90%, 23, 99%, 40 sec |
| Measuring Range | 1, 2 or 3 as specified |
| Sample Requirement (Sensing Unit) |
0.2 to 4.2 cfh flow 37mm Hg Pressure min. |
| Power Requirement (Control Unit) |
Universal 90 to 264 Vac, 50 to 60 Hz |
| Weight (Sensing Unit/Control Unit) |
8.5 kg (18 3/4lb)/1.3kg (3.0 lbs) |
|
|
|